MOLD REMOVAL · INTENSIVE CLEAN + OZONE
Car Mold Removal Service
Mold takes hold when moisture gets trapped inside a vehicle and never fully dries - a car that sat for months, a leak, a window left cracked in the rain. Our mold removal service is an intensive clean and sanitation, not a surface wipe: enzyme cleaners and mold disinfectants through the fabric, hot water extraction, then an ozone treatment to kill what's left in the air and vents. No car is too far gone.
Our Complete Detail is one of our most popular services — deep interior shampooing and stain removal paired with a full exterior wash, clay bar decontamination, and a 6-8 month protection wax. It takes roughly 4-5 hours depending on the vehicle, and every minute goes into getting your car as close to showroom-fresh as it can be.
MOLD REMOVAL · CLEAN, TREAT, SANITISE
WHAT THE MOLD REMOVAL SERVICE INCLUDES
WHAT'S INCLUDED
- Full interior vacuum, top to bottom
- Carpets, seats and floor mats shampooed with enzyme cleaners and mold disinfectants
- Industrial hot water extraction to pull mold and staining out of the fibres
- Plastic and leather surfaces cleaned and steamed
- Ozone treatment to sanitise the cabin, vents and air
- Streak-free windows and mirrors
OUR PROCESS
- Loose items removed - belongings and trash bagged separately
- Interior vacuumed with air compressors, drills, brushes and extraction tools
- Fabric shampooed with enzyme cleaner and mold disinfectant, then hot-water extracted
- Plastics and leather cleaned with non-abrasive pads, detail brushes and steam
- Ozone machine run inside the vehicle for 1-2 hours, then aired out
- Windows cleaned and a final inspection before hand-back
FAQ
Common Questions Before You Book
Answers to the questions we hear most often about service prep, timing, and aftercare.
How do I know if my car actually has mold?
The usual signs are a musty smell that returns after airing the car out, dark speckling on seats, carpet or the headliner, and condensation on the inside of the glass. If the car has been sitting, had a leak, or a window left open, it's worth having us look.
How long does mold removal take?
It varies with severity. The clean and shampoo is most of a day, the ozone machine runs 1-2 hours, and the car then needs several hours to air out before it's ready to drive.
What does it cost?
Between $300 and $1,000 depending on the size, condition and type of vehicle. Send us photos or bring it by and we'll give you a proper estimate.
What is an ozone treatment, and is it safe?
Ozone is a gas that reaches everywhere air reaches - vents, headliner, under the seats - and destroys mold spores, bacteria and odour at the source rather than masking them. We run it with the car closed and empty, then air the vehicle out fully before returning it.
Will the mold come back?
Not if the moisture source is fixed. Mold needs water - a leaking seal, a blocked sunroof drain, a window left cracked. We'll tell you what we find so you can get it sorted.
Can you save a car that has been sitting for months?
Usually, yes. We've brought back cars the owners had written off. If yours is genuinely beyond saving we'll tell you straight rather than take your money.
Ready to Book?
Your Vehicle Deserves Professional Protection
Schedule your detail, coating, or protection package online or call us directly. We're open 7 days a week, 8am-5pm, and serving Lynnwood and the greater Seattle metro area.
(425) 404-0760 | 16101 Hwy 99, Lynnwood, WA