Window Tinting · Lynnwood, WA
Window Tinting in Lynnwood, WA
Professional window tint does more than look good. It rejects solar heat so summer drives stay comfortable, blocks 99% of UV rays that fade interiors and damage skin, and adds privacy and shatter resistance — all installed bubble-free and cut precisely to your glass.
Window Tinting
Our Window Tinting Services
Our auto window tinting services are tailored for the vehicle owner who wants a long-lasting, durable window tint for their vehicle. We exclusively use STEK Window Tint — professional-grade film with a precise cut and bubble-free application.
Ceramic Film
Heat rejection with clarity — reduces haze and glare by up to 92%, blocks up to 99% of UV and infrared rays, and blocks up to 95% of light for privacy. Color-stable, backed by warranty.
Nano Ceramic Film
Our best heat reduction — up to 98% infrared rejection and 99% UV blockage. Non-metallized, so there's no interference with phone, GPS, or radio signals. Limited lifetime warranty.
Our Lifetime Warranty
Our limited lifetime warranty covers bubbling, peeling, fading, and discoloration — plus free film replacement if your glass breaks after repair. All tint is applied within Washington State legal VLT requirements.
Available film grades range from light (70% VLT) to dark (5% VLT). Ask about ceramic tint film upgrades for maximum heat rejection with no signal interference. All installs include a warranty against bubbling, peeling, and delamination. Aftercare: we recommend waiting 3-5 days before you roll down your windows after the tint installation.
SEE A TINT INSTALL IN OUR SHOP
Every tint is cut and fitted in our Lynnwood shop. Most vehicles take two to four hours depending on how many windows you're doing, and every install stays inside Washington's legal limits. Give the film three to five days to cure before you roll the windows down.
FAQ
Window Tinting FAQ
Answers to the questions we hear most often about service prep, timing, and aftercare.
How long does window tinting take?
Usually 2-4 hours depending on the vehicle and how many windows are being done.
What is the difference between Ceramic and Nano Ceramic film?
Both block far more heat and UV than standard film. Nano Ceramic is the higher-spec option - more heat rejection and better clarity at the same visible darkness, with no interference with phone, GPS or radio signal. We'll show you the difference in person.
How long before I can roll my windows down?
Give it at least 3-5 days before rolling the windows down. The film needs time to fully cure and bond to the glass, and rolling down early is the most common way new tint gets damaged.
Is the tint covered by a warranty?
Yes - a lifetime warranty against bubbling, peeling, cracking and fading. It also covers a free re-tint if the glass is broken and replaced.
How dark can I legally go in Washington?
Washington limits how dark the front side windows and windshield can be, and the limits differ between cars and SUVs or trucks. We'll walk you through exactly what is legal for your vehicle before we install anything, so you don't end up with a ticket.
Can you remove my old tint?
Yes. Old, purpling or bubbling film can be stripped and the adhesive cleaned off the glass before new film goes on. Removal is quoted separately since it depends on how badly the old film has degraded.
Our Work
Ready to Book?
Your Vehicle Deserves Professional Protection
Schedule your detail, coating, or protection package online or call us directly. We're open 7 days a week, 8am-5pm, and serving Lynnwood and the greater Seattle metro area.
(425) 404-0760 | 16101 Hwy 99, Lynnwood, WA




